A home inspection can be a stressful process, it plays a major role in the home buying and selling process. Whether you’re buying or selling a home, you’ll likely be faced with a home inspection. At the end of the day, a home inspection doesn’t have to be a stressful process.
We’ve compiled a list of the most common problems home inspectors see when inspecting homes, so that you can become familiar with what to look for before you buy or sell a home.
Because the HVAC system is one of the more important systems in a house, the inspection will certainly include a detailed examination of this equipment. How well an HVAC unit has been maintained can be indicative of how well the entire home has been maintained.
These are some common problems found during home inspections:
Filters: Filters not only protect your system’s mechanical parts from getting dirty, they also help clean the air that runs through the equipment. If they are not changed regularly and kept clean they can cause a whole lot of problems, including: air flow issues, cooling inefficiency, skyrocketing power bills and health issues.
Leaks: Often the biggest HVAC problems are gas line leaks. Any leak is often the precursor to a bigger problem, like a cracked heat exchanger. The heat exchanger converts fuel to heat, and if it’s broken, it can release dangerous gas into the air.
Exhaust flue: This is a vent for the exhaust byproducts to be moved out of the house and released outside. This flue pipe needs to slope up to an outdoor vent or chimney with proper support. And it must be kept away from any flammable materials.
Electrical concerns: Faulty wiring is the cause of most home fires and is one of the most common issues home inspectors find when they inspect interior and exterior wiring, the fuse box and electrical breakers. The most common issues are improper and undersized electric wiring, followed by reverse polarity wiring. Homes that have faulty wiring are likely to blow a fuse or trip a breaker during times of heavy heating use. It’s also important to have an electrical kill switch located close to the furnace so power can be cut immediately in case of an emergency.
- A lubrication of your HVAC system’s moving parts.
- A test of your HVAC’s gas pressure, safety controls and air flow.
- A check of your HVAC’s air filter, thermostat, electrical connections and refrigerant level.
Leaks and emissions: Leaks in the cooling system can allow the escape of refrigerant or gas, and are not only among the most common problems, but also the most potentially dangerous.
Clogged condenser drains: Condensation collects during the cooling process, and is often removed through a drain hose. If this drain hose gets clogged, the condensation water will back up and cause moisture issues.
Dirty condenser coils: Dirty coils can restrict air flow and lower your energy efficiency. Keeping plants and all other obstructions at least one foot away from the unit is helpful, and you can clean the coil surface with a brush or vacuum cleaner.
Un-level condenser unit: The pad for the outside condenser unit should be within 10 degrees of level. Being un-level reduces the effectiveness of lubrication in the tubing and increases stress on refrigerant lines.
Common Problems for Both Heating & Cooling
Ductwork: Air ducts that are improperly installed, cracked, or have broken connections send heated or cooled air into attics or walls instead of into the intended rooms.
Old age: Most heating and cooling equipment has a life expectancy of anywhere from 10 to 20 years, and eventually all pieces will need to be replaced. However, you can extend the life of your equipment by having it maintained regularly. It’s best to have your HVAC system inspected by a licensed technician at least once a year.
For more heating and cooling tips contact the heating and cooling experts at Drake Heating & Air.